How to make lm sensors return CPU temp (it87)? Announcing the arrival of Valued Associate...
Project Euler #1 in C++
Misunderstanding of Sylow theory
Maximum summed subsequences with non-adjacent items
How does Belgium enforce obligatory attendance in elections?
Trademark violation for app?
If Windows 7 doesn't support WSL, then what is "Subsystem for UNIX-based Applications"?
1-probability to calculate two events in a row
What are the discoveries that have been possible with the rejection of positivism?
How would a mousetrap for use in space work?
macOS: Name for app shortcut screen found by pinching with thumb and three fingers
What does Turing mean by this statement?
Is CEO the "profession" with the most psychopaths?
Would it be easier to apply for a UK visa if there is a host family to sponsor for you in going there?
Co-worker has annoying ringtone
Is there any word for a place full of confusion?
A letter with no particular backstory
How does the math work when buying airline miles?
Getting prompted for verification code but where do I put it in?
Do wooden building fires get hotter than 600°C?
Deconstruction is ambiguous
Dyck paths with extra diagonals from valleys (Laser construction)
Do I really need to have a message in a novel to appeal to readers?
How to write capital alpha?
How does light 'choose' between wave and particle behaviour?
How to make lm sensors return CPU temp (it87)?
Announcing the arrival of Valued Associate #679: Cesar Manara
Planned maintenance scheduled April 23, 2019 at 23:30 UTC (7:30pm US/Eastern)lm-sensor finds only one sensorDell Vostro 200 fan speedslm-sensors shows only 1 core tempCant get lm-sensors to load ATI Radeon temp and fan or output all settingsHow to update sensors infolm-sensors issues with sensorsLenovo G50-80 laptop: cooling fans are working for almost all the timeAmd A10 7800 lm-sensorslm-sensors does not show up cpu temperaturelm-sensors only detecting pcie tempnot all items in sensors output is shown (lm-sensors)lm sensors: not showing up cpu fan speed and cpu temp
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty{ margin-bottom:0;
}
,Simply put, I cannot get lm sensors to return my CPU temp. I am running Lubuntu 15.10 (up to date) with an AMD 8350 CPU on a Gigabyte GA-78LMT-USB3 motherboard. What I've done, and the output:
Installation:
sudo apt-get install lm-sensors
sudo sensors-detect
(see: output at bottom of post)
Added it87
and coretemp
to /etc/modules
(rebooted, to no avail)
Installed the following (sudo make
, sudo make install
...):
https://github.com/groeck/it87
Any ideas?
Output from sensors
(post config):
sensors
it8620-isa-0228
Adapter: ISA adapter
in0: +0.90 V (min = +0.00 V, max = +3.06 V)
in1: +1.50 V (min = +0.00 V, max = +3.06 V)
in2: +2.04 V (min = +0.00 V, max = +3.06 V)
in3: +1.84 V (min = +0.00 V, max = +3.06 V)
in4: +2.03 V (min = +0.00 V, max = +3.06 V)
in5: +2.23 V (min = +0.00 V, max = +3.06 V)
in6: +2.23 V (min = +0.00 V, max = +3.06 V)
3VSB: +3.31 V (min = +0.00 V, max = +6.12 V)
Vbat: +2.76 V
fan1: 986 RPM (min = 0 RPM)
fan2: 721 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
temp1: +34.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp2: +27.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode
temp3: +27.0°C (low = +127.0°C, high = +127.0°C) sensor = Intel PECI
intrusion0: ALARM
fam15h_power-pci-00c4
Adapter: PCI adapter
power1: 41.74 W (crit = 125.19 W)
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +11.5°C (high = +70.0°C)
(crit = +80.0°C, hyst = +77.0°C)
Output from "sensors-detect":
# sensors-detect revision 6284 (2015-05-31 14:00:33 +0200)
# System: Gigabyte Technology Co., Ltd. GA-78LMT-USB3 6.0
# Kernel: 4.2.0-34-generic x86_64
# Processor: AMD FX(tm)-8350 Eight-Core Processor (21/2/0)
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... Success!
(driver `k10temp')
AMD Family 16h thermal sensors... No
AMD Family 15h power sensors... Success!
(driver `fam15h_power')
AMD Family 16h power sensors... No
Intel digital thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
Intel 5500/5520/X58 thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... Yes
Found `ITE IT8620E Super IO Sensors' Success!
(address 0x228, driver `it87')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no):
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO):
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Using driver `i2c-piix4' for device 0000:00:14.0: ATI Technologies Inc SB600/SB700/SB800 SMBus
Next adapter: Radeon i2c bit bus 0x90 (i2c-0)
Do you want to scan it? (yes/NO/selectively):
Next adapter: Radeon i2c bit bus 0x91 (i2c-1)
Do you want to scan it? (yes/NO/selectively):
Next adapter: Radeon i2c bit bus 0x92 (i2c-2)
Do you want to scan it? (yes/NO/selectively):
Next adapter: Radeon i2c bit bus 0x93 (i2c-3)
Do you want to scan it? (yes/NO/selectively):
Next adapter: Radeon i2c bit bus 0x14 (i2c-4)
Do you want to scan it? (yes/NO/selectively):
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `k10temp' (autoloaded):
* Chip `AMD Family 15h thermal sensors' (confidence: 9)
Driver `fam15h_power' (autoloaded):
* Chip `AMD Family 15h power sensors' (confidence: 9)
Driver `it87':
* ISA bus, address 0x228
Chip `ITE IT8620E Super IO Sensors' (confidence: 9)
To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
it87
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!
Do you want to add these lines automatically to /etc/modules? (yes/NO)
Unloading cpuid... OK
lm-sensors
add a comment |
,Simply put, I cannot get lm sensors to return my CPU temp. I am running Lubuntu 15.10 (up to date) with an AMD 8350 CPU on a Gigabyte GA-78LMT-USB3 motherboard. What I've done, and the output:
Installation:
sudo apt-get install lm-sensors
sudo sensors-detect
(see: output at bottom of post)
Added it87
and coretemp
to /etc/modules
(rebooted, to no avail)
Installed the following (sudo make
, sudo make install
...):
https://github.com/groeck/it87
Any ideas?
Output from sensors
(post config):
sensors
it8620-isa-0228
Adapter: ISA adapter
in0: +0.90 V (min = +0.00 V, max = +3.06 V)
in1: +1.50 V (min = +0.00 V, max = +3.06 V)
in2: +2.04 V (min = +0.00 V, max = +3.06 V)
in3: +1.84 V (min = +0.00 V, max = +3.06 V)
in4: +2.03 V (min = +0.00 V, max = +3.06 V)
in5: +2.23 V (min = +0.00 V, max = +3.06 V)
in6: +2.23 V (min = +0.00 V, max = +3.06 V)
3VSB: +3.31 V (min = +0.00 V, max = +6.12 V)
Vbat: +2.76 V
fan1: 986 RPM (min = 0 RPM)
fan2: 721 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
temp1: +34.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp2: +27.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode
temp3: +27.0°C (low = +127.0°C, high = +127.0°C) sensor = Intel PECI
intrusion0: ALARM
fam15h_power-pci-00c4
Adapter: PCI adapter
power1: 41.74 W (crit = 125.19 W)
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +11.5°C (high = +70.0°C)
(crit = +80.0°C, hyst = +77.0°C)
Output from "sensors-detect":
# sensors-detect revision 6284 (2015-05-31 14:00:33 +0200)
# System: Gigabyte Technology Co., Ltd. GA-78LMT-USB3 6.0
# Kernel: 4.2.0-34-generic x86_64
# Processor: AMD FX(tm)-8350 Eight-Core Processor (21/2/0)
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... Success!
(driver `k10temp')
AMD Family 16h thermal sensors... No
AMD Family 15h power sensors... Success!
(driver `fam15h_power')
AMD Family 16h power sensors... No
Intel digital thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
Intel 5500/5520/X58 thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... Yes
Found `ITE IT8620E Super IO Sensors' Success!
(address 0x228, driver `it87')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no):
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO):
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Using driver `i2c-piix4' for device 0000:00:14.0: ATI Technologies Inc SB600/SB700/SB800 SMBus
Next adapter: Radeon i2c bit bus 0x90 (i2c-0)
Do you want to scan it? (yes/NO/selectively):
Next adapter: Radeon i2c bit bus 0x91 (i2c-1)
Do you want to scan it? (yes/NO/selectively):
Next adapter: Radeon i2c bit bus 0x92 (i2c-2)
Do you want to scan it? (yes/NO/selectively):
Next adapter: Radeon i2c bit bus 0x93 (i2c-3)
Do you want to scan it? (yes/NO/selectively):
Next adapter: Radeon i2c bit bus 0x14 (i2c-4)
Do you want to scan it? (yes/NO/selectively):
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `k10temp' (autoloaded):
* Chip `AMD Family 15h thermal sensors' (confidence: 9)
Driver `fam15h_power' (autoloaded):
* Chip `AMD Family 15h power sensors' (confidence: 9)
Driver `it87':
* ISA bus, address 0x228
Chip `ITE IT8620E Super IO Sensors' (confidence: 9)
To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
it87
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!
Do you want to add these lines automatically to /etc/modules? (yes/NO)
Unloading cpuid... OK
lm-sensors
I see 3 temperatures measured. One of those is probably the CPU.
– TheWanderer
Mar 21 '16 at 16:29
The it87.ko driver is too old and does not support newer chipsets bugs.launchpad.net/ubuntu/+source/linux/+bug/1740736
– Metta Crawler
Apr 21 '18 at 2:28
add a comment |
,Simply put, I cannot get lm sensors to return my CPU temp. I am running Lubuntu 15.10 (up to date) with an AMD 8350 CPU on a Gigabyte GA-78LMT-USB3 motherboard. What I've done, and the output:
Installation:
sudo apt-get install lm-sensors
sudo sensors-detect
(see: output at bottom of post)
Added it87
and coretemp
to /etc/modules
(rebooted, to no avail)
Installed the following (sudo make
, sudo make install
...):
https://github.com/groeck/it87
Any ideas?
Output from sensors
(post config):
sensors
it8620-isa-0228
Adapter: ISA adapter
in0: +0.90 V (min = +0.00 V, max = +3.06 V)
in1: +1.50 V (min = +0.00 V, max = +3.06 V)
in2: +2.04 V (min = +0.00 V, max = +3.06 V)
in3: +1.84 V (min = +0.00 V, max = +3.06 V)
in4: +2.03 V (min = +0.00 V, max = +3.06 V)
in5: +2.23 V (min = +0.00 V, max = +3.06 V)
in6: +2.23 V (min = +0.00 V, max = +3.06 V)
3VSB: +3.31 V (min = +0.00 V, max = +6.12 V)
Vbat: +2.76 V
fan1: 986 RPM (min = 0 RPM)
fan2: 721 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
temp1: +34.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp2: +27.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode
temp3: +27.0°C (low = +127.0°C, high = +127.0°C) sensor = Intel PECI
intrusion0: ALARM
fam15h_power-pci-00c4
Adapter: PCI adapter
power1: 41.74 W (crit = 125.19 W)
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +11.5°C (high = +70.0°C)
(crit = +80.0°C, hyst = +77.0°C)
Output from "sensors-detect":
# sensors-detect revision 6284 (2015-05-31 14:00:33 +0200)
# System: Gigabyte Technology Co., Ltd. GA-78LMT-USB3 6.0
# Kernel: 4.2.0-34-generic x86_64
# Processor: AMD FX(tm)-8350 Eight-Core Processor (21/2/0)
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... Success!
(driver `k10temp')
AMD Family 16h thermal sensors... No
AMD Family 15h power sensors... Success!
(driver `fam15h_power')
AMD Family 16h power sensors... No
Intel digital thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
Intel 5500/5520/X58 thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... Yes
Found `ITE IT8620E Super IO Sensors' Success!
(address 0x228, driver `it87')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no):
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO):
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Using driver `i2c-piix4' for device 0000:00:14.0: ATI Technologies Inc SB600/SB700/SB800 SMBus
Next adapter: Radeon i2c bit bus 0x90 (i2c-0)
Do you want to scan it? (yes/NO/selectively):
Next adapter: Radeon i2c bit bus 0x91 (i2c-1)
Do you want to scan it? (yes/NO/selectively):
Next adapter: Radeon i2c bit bus 0x92 (i2c-2)
Do you want to scan it? (yes/NO/selectively):
Next adapter: Radeon i2c bit bus 0x93 (i2c-3)
Do you want to scan it? (yes/NO/selectively):
Next adapter: Radeon i2c bit bus 0x14 (i2c-4)
Do you want to scan it? (yes/NO/selectively):
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `k10temp' (autoloaded):
* Chip `AMD Family 15h thermal sensors' (confidence: 9)
Driver `fam15h_power' (autoloaded):
* Chip `AMD Family 15h power sensors' (confidence: 9)
Driver `it87':
* ISA bus, address 0x228
Chip `ITE IT8620E Super IO Sensors' (confidence: 9)
To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
it87
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!
Do you want to add these lines automatically to /etc/modules? (yes/NO)
Unloading cpuid... OK
lm-sensors
,Simply put, I cannot get lm sensors to return my CPU temp. I am running Lubuntu 15.10 (up to date) with an AMD 8350 CPU on a Gigabyte GA-78LMT-USB3 motherboard. What I've done, and the output:
Installation:
sudo apt-get install lm-sensors
sudo sensors-detect
(see: output at bottom of post)
Added it87
and coretemp
to /etc/modules
(rebooted, to no avail)
Installed the following (sudo make
, sudo make install
...):
https://github.com/groeck/it87
Any ideas?
Output from sensors
(post config):
sensors
it8620-isa-0228
Adapter: ISA adapter
in0: +0.90 V (min = +0.00 V, max = +3.06 V)
in1: +1.50 V (min = +0.00 V, max = +3.06 V)
in2: +2.04 V (min = +0.00 V, max = +3.06 V)
in3: +1.84 V (min = +0.00 V, max = +3.06 V)
in4: +2.03 V (min = +0.00 V, max = +3.06 V)
in5: +2.23 V (min = +0.00 V, max = +3.06 V)
in6: +2.23 V (min = +0.00 V, max = +3.06 V)
3VSB: +3.31 V (min = +0.00 V, max = +6.12 V)
Vbat: +2.76 V
fan1: 986 RPM (min = 0 RPM)
fan2: 721 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
temp1: +34.0°C (low = +127.0°C, high = +127.0°C) sensor = thermistor
temp2: +27.0°C (low = +127.0°C, high = +127.0°C) sensor = thermal diode
temp3: +27.0°C (low = +127.0°C, high = +127.0°C) sensor = Intel PECI
intrusion0: ALARM
fam15h_power-pci-00c4
Adapter: PCI adapter
power1: 41.74 W (crit = 125.19 W)
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +11.5°C (high = +70.0°C)
(crit = +80.0°C, hyst = +77.0°C)
Output from "sensors-detect":
# sensors-detect revision 6284 (2015-05-31 14:00:33 +0200)
# System: Gigabyte Technology Co., Ltd. GA-78LMT-USB3 6.0
# Kernel: 4.2.0-34-generic x86_64
# Processor: AMD FX(tm)-8350 Eight-Core Processor (21/2/0)
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... Success!
(driver `k10temp')
AMD Family 16h thermal sensors... No
AMD Family 15h power sensors... Success!
(driver `fam15h_power')
AMD Family 16h power sensors... No
Intel digital thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
Intel 5500/5520/X58 thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... Yes
Found `ITE IT8620E Super IO Sensors' Success!
(address 0x228, driver `it87')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no):
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO):
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Using driver `i2c-piix4' for device 0000:00:14.0: ATI Technologies Inc SB600/SB700/SB800 SMBus
Next adapter: Radeon i2c bit bus 0x90 (i2c-0)
Do you want to scan it? (yes/NO/selectively):
Next adapter: Radeon i2c bit bus 0x91 (i2c-1)
Do you want to scan it? (yes/NO/selectively):
Next adapter: Radeon i2c bit bus 0x92 (i2c-2)
Do you want to scan it? (yes/NO/selectively):
Next adapter: Radeon i2c bit bus 0x93 (i2c-3)
Do you want to scan it? (yes/NO/selectively):
Next adapter: Radeon i2c bit bus 0x14 (i2c-4)
Do you want to scan it? (yes/NO/selectively):
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `k10temp' (autoloaded):
* Chip `AMD Family 15h thermal sensors' (confidence: 9)
Driver `fam15h_power' (autoloaded):
* Chip `AMD Family 15h power sensors' (confidence: 9)
Driver `it87':
* ISA bus, address 0x228
Chip `ITE IT8620E Super IO Sensors' (confidence: 9)
To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
it87
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!
Do you want to add these lines automatically to /etc/modules? (yes/NO)
Unloading cpuid... OK
lm-sensors
lm-sensors
edited 1 hour ago
Kevin Bowen
14.9k155971
14.9k155971
asked Mar 21 '16 at 16:27
MattMatt
1814
1814
I see 3 temperatures measured. One of those is probably the CPU.
– TheWanderer
Mar 21 '16 at 16:29
The it87.ko driver is too old and does not support newer chipsets bugs.launchpad.net/ubuntu/+source/linux/+bug/1740736
– Metta Crawler
Apr 21 '18 at 2:28
add a comment |
I see 3 temperatures measured. One of those is probably the CPU.
– TheWanderer
Mar 21 '16 at 16:29
The it87.ko driver is too old and does not support newer chipsets bugs.launchpad.net/ubuntu/+source/linux/+bug/1740736
– Metta Crawler
Apr 21 '18 at 2:28
I see 3 temperatures measured. One of those is probably the CPU.
– TheWanderer
Mar 21 '16 at 16:29
I see 3 temperatures measured. One of those is probably the CPU.
– TheWanderer
Mar 21 '16 at 16:29
The it87.ko driver is too old and does not support newer chipsets bugs.launchpad.net/ubuntu/+source/linux/+bug/1740736
– Metta Crawler
Apr 21 '18 at 2:28
The it87.ko driver is too old and does not support newer chipsets bugs.launchpad.net/ubuntu/+source/linux/+bug/1740736
– Metta Crawler
Apr 21 '18 at 2:28
add a comment |
2 Answers
2
active
oldest
votes
So you have run sudo sensors-detect
accepted its defaults and allowed it to add it87
and coretemp
to /etc/modules
yet you don't see the outputs from the it87 chip.
If you run lsmod
from a terminal you will find coretemp but it87 is not there.
The answer is to edit /etc/default/grub
. You need to append acpi_enforce_resources=lax
at the end of the line GRUB_CMDLINE_LINUX
. Here is a screenshot of mine with the relevant line highlighted.
Then sudo update-grub
followed by a reboot.
The it87 sensor outputs will now appear. You will then need to create or find a configuration file for your motherboard and insert it in /etc/sensors.d
.
If done properly this will give meaningful names to all the temperatures, voltages and fan speeds detected, discard outputs from any sensors not connected to anything, set reasonable limits and calculate the values of voltages sensed using voltage divider resistors. Here is a screenshot of my it87 outputs using xsensors.
Hi Steve, thanks for the information! Firstly, when I run lsmod - it87 does in fact appear, but coretemp does not. I've done everything else, but I'm not sure how to make or find a config file. Any hints?
– Matt
Apr 25 '16 at 16:04
Try googling the name of your motherboard followed by lm-sensors configuration. Its easy to write your own instructions here. wiki.archlinux.org/index.php/lm_sensors. The key is to make sure the values returned by sensors match the values returned by your BIOS. If you run into trouble ask a new question stating the make and number of your motherboard, and showing the output from sensors. A photo of the values from the BIOS would also be useful.
– Steve Roome
Apr 25 '16 at 18:20
add a comment |
temp3
is your CPU temperature. Intel PECI
is the bridge between temperature sensors and the OS.
Source: http://www.intel.com/content/www/us/en/embedded/testing-and-validation/cpu-monitoring-dts-peci-paper.html
Many thanks for the edit (above) and the answer. I'm curious, however, why I don't see core temperatures similar to what others get with the sensor command?
– Matt
Mar 21 '16 at 17:25
Do you have a custom-built computer? It's possible manufacturers set names for the sensors.
– TheWanderer
Mar 21 '16 at 17:32
I built it myself, yes - it's part of a cluster I've made for parallel computing. CPU will be under heavy load, so I'm very worried about watching the temperature.
– Matt
Mar 21 '16 at 17:34
Well, that one should be the sensor.
– TheWanderer
Mar 21 '16 at 17:34
Of note: BIOS shows 36C resting, and the PECI consistently shows 27C... Are you sure the temp3 channel is the CPU, or could temp1 be it?
– Matt
Mar 21 '16 at 18:43
|
show 4 more comments
Your Answer
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "89"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f748615%2fhow-to-make-lm-sensors-return-cpu-temp-it87%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
So you have run sudo sensors-detect
accepted its defaults and allowed it to add it87
and coretemp
to /etc/modules
yet you don't see the outputs from the it87 chip.
If you run lsmod
from a terminal you will find coretemp but it87 is not there.
The answer is to edit /etc/default/grub
. You need to append acpi_enforce_resources=lax
at the end of the line GRUB_CMDLINE_LINUX
. Here is a screenshot of mine with the relevant line highlighted.
Then sudo update-grub
followed by a reboot.
The it87 sensor outputs will now appear. You will then need to create or find a configuration file for your motherboard and insert it in /etc/sensors.d
.
If done properly this will give meaningful names to all the temperatures, voltages and fan speeds detected, discard outputs from any sensors not connected to anything, set reasonable limits and calculate the values of voltages sensed using voltage divider resistors. Here is a screenshot of my it87 outputs using xsensors.
Hi Steve, thanks for the information! Firstly, when I run lsmod - it87 does in fact appear, but coretemp does not. I've done everything else, but I'm not sure how to make or find a config file. Any hints?
– Matt
Apr 25 '16 at 16:04
Try googling the name of your motherboard followed by lm-sensors configuration. Its easy to write your own instructions here. wiki.archlinux.org/index.php/lm_sensors. The key is to make sure the values returned by sensors match the values returned by your BIOS. If you run into trouble ask a new question stating the make and number of your motherboard, and showing the output from sensors. A photo of the values from the BIOS would also be useful.
– Steve Roome
Apr 25 '16 at 18:20
add a comment |
So you have run sudo sensors-detect
accepted its defaults and allowed it to add it87
and coretemp
to /etc/modules
yet you don't see the outputs from the it87 chip.
If you run lsmod
from a terminal you will find coretemp but it87 is not there.
The answer is to edit /etc/default/grub
. You need to append acpi_enforce_resources=lax
at the end of the line GRUB_CMDLINE_LINUX
. Here is a screenshot of mine with the relevant line highlighted.
Then sudo update-grub
followed by a reboot.
The it87 sensor outputs will now appear. You will then need to create or find a configuration file for your motherboard and insert it in /etc/sensors.d
.
If done properly this will give meaningful names to all the temperatures, voltages and fan speeds detected, discard outputs from any sensors not connected to anything, set reasonable limits and calculate the values of voltages sensed using voltage divider resistors. Here is a screenshot of my it87 outputs using xsensors.
Hi Steve, thanks for the information! Firstly, when I run lsmod - it87 does in fact appear, but coretemp does not. I've done everything else, but I'm not sure how to make or find a config file. Any hints?
– Matt
Apr 25 '16 at 16:04
Try googling the name of your motherboard followed by lm-sensors configuration. Its easy to write your own instructions here. wiki.archlinux.org/index.php/lm_sensors. The key is to make sure the values returned by sensors match the values returned by your BIOS. If you run into trouble ask a new question stating the make and number of your motherboard, and showing the output from sensors. A photo of the values from the BIOS would also be useful.
– Steve Roome
Apr 25 '16 at 18:20
add a comment |
So you have run sudo sensors-detect
accepted its defaults and allowed it to add it87
and coretemp
to /etc/modules
yet you don't see the outputs from the it87 chip.
If you run lsmod
from a terminal you will find coretemp but it87 is not there.
The answer is to edit /etc/default/grub
. You need to append acpi_enforce_resources=lax
at the end of the line GRUB_CMDLINE_LINUX
. Here is a screenshot of mine with the relevant line highlighted.
Then sudo update-grub
followed by a reboot.
The it87 sensor outputs will now appear. You will then need to create or find a configuration file for your motherboard and insert it in /etc/sensors.d
.
If done properly this will give meaningful names to all the temperatures, voltages and fan speeds detected, discard outputs from any sensors not connected to anything, set reasonable limits and calculate the values of voltages sensed using voltage divider resistors. Here is a screenshot of my it87 outputs using xsensors.
So you have run sudo sensors-detect
accepted its defaults and allowed it to add it87
and coretemp
to /etc/modules
yet you don't see the outputs from the it87 chip.
If you run lsmod
from a terminal you will find coretemp but it87 is not there.
The answer is to edit /etc/default/grub
. You need to append acpi_enforce_resources=lax
at the end of the line GRUB_CMDLINE_LINUX
. Here is a screenshot of mine with the relevant line highlighted.
Then sudo update-grub
followed by a reboot.
The it87 sensor outputs will now appear. You will then need to create or find a configuration file for your motherboard and insert it in /etc/sensors.d
.
If done properly this will give meaningful names to all the temperatures, voltages and fan speeds detected, discard outputs from any sensors not connected to anything, set reasonable limits and calculate the values of voltages sensed using voltage divider resistors. Here is a screenshot of my it87 outputs using xsensors.
edited Apr 16 '16 at 10:57
muru
1
1
answered Apr 16 '16 at 10:54
Steve RoomeSteve Roome
1,0251619
1,0251619
Hi Steve, thanks for the information! Firstly, when I run lsmod - it87 does in fact appear, but coretemp does not. I've done everything else, but I'm not sure how to make or find a config file. Any hints?
– Matt
Apr 25 '16 at 16:04
Try googling the name of your motherboard followed by lm-sensors configuration. Its easy to write your own instructions here. wiki.archlinux.org/index.php/lm_sensors. The key is to make sure the values returned by sensors match the values returned by your BIOS. If you run into trouble ask a new question stating the make and number of your motherboard, and showing the output from sensors. A photo of the values from the BIOS would also be useful.
– Steve Roome
Apr 25 '16 at 18:20
add a comment |
Hi Steve, thanks for the information! Firstly, when I run lsmod - it87 does in fact appear, but coretemp does not. I've done everything else, but I'm not sure how to make or find a config file. Any hints?
– Matt
Apr 25 '16 at 16:04
Try googling the name of your motherboard followed by lm-sensors configuration. Its easy to write your own instructions here. wiki.archlinux.org/index.php/lm_sensors. The key is to make sure the values returned by sensors match the values returned by your BIOS. If you run into trouble ask a new question stating the make and number of your motherboard, and showing the output from sensors. A photo of the values from the BIOS would also be useful.
– Steve Roome
Apr 25 '16 at 18:20
Hi Steve, thanks for the information! Firstly, when I run lsmod - it87 does in fact appear, but coretemp does not. I've done everything else, but I'm not sure how to make or find a config file. Any hints?
– Matt
Apr 25 '16 at 16:04
Hi Steve, thanks for the information! Firstly, when I run lsmod - it87 does in fact appear, but coretemp does not. I've done everything else, but I'm not sure how to make or find a config file. Any hints?
– Matt
Apr 25 '16 at 16:04
Try googling the name of your motherboard followed by lm-sensors configuration. Its easy to write your own instructions here. wiki.archlinux.org/index.php/lm_sensors. The key is to make sure the values returned by sensors match the values returned by your BIOS. If you run into trouble ask a new question stating the make and number of your motherboard, and showing the output from sensors. A photo of the values from the BIOS would also be useful.
– Steve Roome
Apr 25 '16 at 18:20
Try googling the name of your motherboard followed by lm-sensors configuration. Its easy to write your own instructions here. wiki.archlinux.org/index.php/lm_sensors. The key is to make sure the values returned by sensors match the values returned by your BIOS. If you run into trouble ask a new question stating the make and number of your motherboard, and showing the output from sensors. A photo of the values from the BIOS would also be useful.
– Steve Roome
Apr 25 '16 at 18:20
add a comment |
temp3
is your CPU temperature. Intel PECI
is the bridge between temperature sensors and the OS.
Source: http://www.intel.com/content/www/us/en/embedded/testing-and-validation/cpu-monitoring-dts-peci-paper.html
Many thanks for the edit (above) and the answer. I'm curious, however, why I don't see core temperatures similar to what others get with the sensor command?
– Matt
Mar 21 '16 at 17:25
Do you have a custom-built computer? It's possible manufacturers set names for the sensors.
– TheWanderer
Mar 21 '16 at 17:32
I built it myself, yes - it's part of a cluster I've made for parallel computing. CPU will be under heavy load, so I'm very worried about watching the temperature.
– Matt
Mar 21 '16 at 17:34
Well, that one should be the sensor.
– TheWanderer
Mar 21 '16 at 17:34
Of note: BIOS shows 36C resting, and the PECI consistently shows 27C... Are you sure the temp3 channel is the CPU, or could temp1 be it?
– Matt
Mar 21 '16 at 18:43
|
show 4 more comments
temp3
is your CPU temperature. Intel PECI
is the bridge between temperature sensors and the OS.
Source: http://www.intel.com/content/www/us/en/embedded/testing-and-validation/cpu-monitoring-dts-peci-paper.html
Many thanks for the edit (above) and the answer. I'm curious, however, why I don't see core temperatures similar to what others get with the sensor command?
– Matt
Mar 21 '16 at 17:25
Do you have a custom-built computer? It's possible manufacturers set names for the sensors.
– TheWanderer
Mar 21 '16 at 17:32
I built it myself, yes - it's part of a cluster I've made for parallel computing. CPU will be under heavy load, so I'm very worried about watching the temperature.
– Matt
Mar 21 '16 at 17:34
Well, that one should be the sensor.
– TheWanderer
Mar 21 '16 at 17:34
Of note: BIOS shows 36C resting, and the PECI consistently shows 27C... Are you sure the temp3 channel is the CPU, or could temp1 be it?
– Matt
Mar 21 '16 at 18:43
|
show 4 more comments
temp3
is your CPU temperature. Intel PECI
is the bridge between temperature sensors and the OS.
Source: http://www.intel.com/content/www/us/en/embedded/testing-and-validation/cpu-monitoring-dts-peci-paper.html
temp3
is your CPU temperature. Intel PECI
is the bridge between temperature sensors and the OS.
Source: http://www.intel.com/content/www/us/en/embedded/testing-and-validation/cpu-monitoring-dts-peci-paper.html
answered Mar 21 '16 at 16:31
TheWandererTheWanderer
16.2k113657
16.2k113657
Many thanks for the edit (above) and the answer. I'm curious, however, why I don't see core temperatures similar to what others get with the sensor command?
– Matt
Mar 21 '16 at 17:25
Do you have a custom-built computer? It's possible manufacturers set names for the sensors.
– TheWanderer
Mar 21 '16 at 17:32
I built it myself, yes - it's part of a cluster I've made for parallel computing. CPU will be under heavy load, so I'm very worried about watching the temperature.
– Matt
Mar 21 '16 at 17:34
Well, that one should be the sensor.
– TheWanderer
Mar 21 '16 at 17:34
Of note: BIOS shows 36C resting, and the PECI consistently shows 27C... Are you sure the temp3 channel is the CPU, or could temp1 be it?
– Matt
Mar 21 '16 at 18:43
|
show 4 more comments
Many thanks for the edit (above) and the answer. I'm curious, however, why I don't see core temperatures similar to what others get with the sensor command?
– Matt
Mar 21 '16 at 17:25
Do you have a custom-built computer? It's possible manufacturers set names for the sensors.
– TheWanderer
Mar 21 '16 at 17:32
I built it myself, yes - it's part of a cluster I've made for parallel computing. CPU will be under heavy load, so I'm very worried about watching the temperature.
– Matt
Mar 21 '16 at 17:34
Well, that one should be the sensor.
– TheWanderer
Mar 21 '16 at 17:34
Of note: BIOS shows 36C resting, and the PECI consistently shows 27C... Are you sure the temp3 channel is the CPU, or could temp1 be it?
– Matt
Mar 21 '16 at 18:43
Many thanks for the edit (above) and the answer. I'm curious, however, why I don't see core temperatures similar to what others get with the sensor command?
– Matt
Mar 21 '16 at 17:25
Many thanks for the edit (above) and the answer. I'm curious, however, why I don't see core temperatures similar to what others get with the sensor command?
– Matt
Mar 21 '16 at 17:25
Do you have a custom-built computer? It's possible manufacturers set names for the sensors.
– TheWanderer
Mar 21 '16 at 17:32
Do you have a custom-built computer? It's possible manufacturers set names for the sensors.
– TheWanderer
Mar 21 '16 at 17:32
I built it myself, yes - it's part of a cluster I've made for parallel computing. CPU will be under heavy load, so I'm very worried about watching the temperature.
– Matt
Mar 21 '16 at 17:34
I built it myself, yes - it's part of a cluster I've made for parallel computing. CPU will be under heavy load, so I'm very worried about watching the temperature.
– Matt
Mar 21 '16 at 17:34
Well, that one should be the sensor.
– TheWanderer
Mar 21 '16 at 17:34
Well, that one should be the sensor.
– TheWanderer
Mar 21 '16 at 17:34
Of note: BIOS shows 36C resting, and the PECI consistently shows 27C... Are you sure the temp3 channel is the CPU, or could temp1 be it?
– Matt
Mar 21 '16 at 18:43
Of note: BIOS shows 36C resting, and the PECI consistently shows 27C... Are you sure the temp3 channel is the CPU, or could temp1 be it?
– Matt
Mar 21 '16 at 18:43
|
show 4 more comments
Thanks for contributing an answer to Ask Ubuntu!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2faskubuntu.com%2fquestions%2f748615%2fhow-to-make-lm-sensors-return-cpu-temp-it87%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
I see 3 temperatures measured. One of those is probably the CPU.
– TheWanderer
Mar 21 '16 at 16:29
The it87.ko driver is too old and does not support newer chipsets bugs.launchpad.net/ubuntu/+source/linux/+bug/1740736
– Metta Crawler
Apr 21 '18 at 2:28