UART pins to unpowered MCU?Separating USB/MCU power busesPower switching a higher DC supply from a...
Shifting between bemols (flats) and diesis (sharps)in the key signature
Are babies of evil humanoid species inherently evil?
Single word request: Harming the benefactor
Hotkey (or other quick way) to insert a keyframe for only one component of a vector-valued property?
Could you please stop shuffling the deck and play already?
Bash script should only kill those instances of another script's that it has launched
Filtering SOQL results with optional conditionals
PTIJ: wiping amalek’s memory?
Why was Goose renamed from Chewie for the Captain Marvel film?
List elements digit difference sort
Motivation for Zeta Function of an Algebraic Variety
At what distance can a bugbear, holding a reach weapon, with Polearm Mastery, get their Opportunity Attack?
How to detect if C code (which needs 'extern C') is compiled in C++
Database Backup for data and log files
Was Luke Skywalker the leader of the Rebel forces on Hoth?
What Happens when Passenger Refuses to Fly Boeing 737 Max?
Why is computing ridge regression with a Cholesky decomposition much quicker than using SVD?
An alternative proof of an application of Hahn-Banach
How can I get players to stop ignoring or overlooking the plot hooks I'm giving them?
PTIJ: Should I kill my computer after installing software?
They call me Inspector Morse
finite abelian groups tensor product.
In the quantum hamiltonian, why does kinetic energy turn into an operator while potential doesn't?
Error during using callback start_page_number in lualatex
UART pins to unpowered MCU?
Separating USB/MCU power busesPower switching a higher DC supply from a mcuProtecting Microcontroller Input Pins from Soft Power SwitchDriving a 3v Latching Relay with an 1.8v logic MCU Not WorkingUnpowered MAX232 - input 'leaking' into VccDoes USB CDC always use a UART channel?Best way to connect to UART lines to multiple entitiesPowering MCU from both USB or BatteryMCU card design considerationsIs a voltage level shifter necessary?
$begingroup$
I'm using a USB-UART IC with an MCU, which is powered from a battery.
The USB-UART IC is powered from USB connector, not from the battery, so that I don't need to open up a console every time when the switch goes off and on.
simulate this circuit – Schematic created using CircuitLab
edit: I didn't draw it on the figure but the IC has an internal 3.3V regulator and every VDD is on the 3.3V level when the switch is on.
Now I'm worried about when the USB is plugged and the switch is still off.
The MCU document says that every input pin's maximum rating is VDD + 0.3, which would be 0.3 V when the MCU is not powered.
If the TX/RX pair on the USB-UART side goes high, will it destroy the pins on the MCU side?
If so, What do I need between the TX/RX pairs?
microcontroller power uart
asked 5 hours ago
Inbae JeongInbae Jeong
1284
New contributor
Inbae Jeong is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
|
show 4 more comments
$begingroup$
I'm using a USB-UART IC with an MCU, which is powered from a battery.
The USB-UART IC is powered from USB connector, not from the battery, so that I don't need to open up a console every time when the switch goes off and on.
simulate this circuit – Schematic created using CircuitLab
edit: I didn't draw it on the figure but the IC has an internal 3.3V regulator and every VDD is on the 3.3V level when the switch is on.
Now I'm worried about when the USB is plugged and the switch is still off.
The MCU document says that every input pin's maximum rating is VDD + 0.3, which would be 0.3 V when the MCU is not powered.
If the TX/RX pair on the USB-UART side goes high, will it destroy the pins on the MCU side?
If so, What do I need between the TX/RX pairs?
microcontroller power uart
asked 5 hours ago
Inbae JeongInbae Jeong
1284
New contributor
Inbae Jeong is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
$begingroup$
@Toor What does "tbh" mean?
$endgroup$
– Elliot Alderson
5 hours ago
1
$begingroup$
It'll probably be okay.The gates can should be able to tolerate up to their maximum operating voltage anyways since they need to be able to do that to function at the top end of their supply voltage range. The Vdd+0.3 is in reference to the ESD clamp diodes in the MCU, but if the MCU is unpowered, those diodes don't have a rail to clamp to. If a 5V capable MCU was being powered off 3V and you applied 5V to an I/O, those diodes would try and clamp to the 3.3V rail, but that doesn't mean it would blow without them at 5V. You can use series resistors to limit the current through said diodes.
$endgroup$
– Toor
5 hours ago
$begingroup$
@ElliotAlderson "tbh" is a common internet-ism for "to be honest".
$endgroup$
– Hearth
5 hours ago
5
$begingroup$
@Toor The diodes will create a power rail; see youtube.com/watch?v=2yFh7Vv0Paw.
$endgroup$
– CL.
4 hours ago
3
$begingroup$
This can indeed be an issue - not only the theoretical risk of damage but there are parts that won't do a clean power on reset if they were previously "sorta" powered by I/Os before real power was applied. If you find the board power net getting pulled up to .5v - .6v when "off" you may be in trouble territory.
$endgroup$
– Chris Stratton
4 hours ago
|
show 4 more comments
$begingroup$
I'm using a USB-UART IC with an MCU, which is powered from a battery.
The USB-UART IC is powered from USB connector, not from the battery, so that I don't need to open up a console every time when the switch goes off and on.
simulate this circuit – Schematic created using CircuitLab
edit: I didn't draw it on the figure but the IC has an internal 3.3V regulator and every VDD is on the 3.3V level when the switch is on.
Now I'm worried about when the USB is plugged and the switch is still off.
The MCU document says that every input pin's maximum rating is VDD + 0.3, which would be 0.3 V when the MCU is not powered.
If the TX/RX pair on the USB-UART side goes high, will it destroy the pins on the MCU side?
If so, What do I need between the TX/RX pairs?
microcontroller power uart
asked 5 hours ago
Inbae JeongInbae Jeong
1284
New contributor
Inbae Jeong is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$endgroup$
I'm using a USB-UART IC with an MCU, which is powered from a battery.
The USB-UART IC is powered from USB connector, not from the battery, so that I don't need to open up a console every time when the switch goes off and on.
simulate this circuit – Schematic created using CircuitLab
edit: I didn't draw it on the figure but the IC has an internal 3.3V regulator and every VDD is on the 3.3V level when the switch is on.
Now I'm worried about when the USB is plugged and the switch is still off.
The MCU document says that every input pin's maximum rating is VDD + 0.3, which would be 0.3 V when the MCU is not powered.
If the TX/RX pair on the USB-UART side goes high, will it destroy the pins on the MCU side?
If so, What do I need between the TX/RX pairs?
microcontroller power uart
microcontroller power uart
asked 5 hours ago
Inbae JeongInbae Jeong
1284
New contributor
Inbae Jeong is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 5 hours ago
Inbae JeongInbae Jeong
1284
New contributor
Inbae Jeong is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
edited 5 hours ago
Inbae Jeong
asked 5 hours ago
Inbae JeongInbae Jeong
1284
New contributor
Inbae Jeong is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
asked 5 hours ago
Inbae JeongInbae Jeong
1284
asked 5 hours ago
Inbae JeongInbae Jeong
1284
1284
New contributor
Inbae Jeong is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
New contributor
Inbae Jeong is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
Inbae Jeong is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.
$begingroup$
@Toor What does "tbh" mean?
$endgroup$
– Elliot Alderson
5 hours ago
1
$begingroup$
It'll probably be okay.The gates can should be able to tolerate up to their maximum operating voltage anyways since they need to be able to do that to function at the top end of their supply voltage range. The Vdd+0.3 is in reference to the ESD clamp diodes in the MCU, but if the MCU is unpowered, those diodes don't have a rail to clamp to. If a 5V capable MCU was being powered off 3V and you applied 5V to an I/O, those diodes would try and clamp to the 3.3V rail, but that doesn't mean it would blow without them at 5V. You can use series resistors to limit the current through said diodes.
$endgroup$
– Toor
5 hours ago
$begingroup$
@ElliotAlderson "tbh" is a common internet-ism for "to be honest".
$endgroup$
– Hearth
5 hours ago
5
$begingroup$
@Toor The diodes will create a power rail; see youtube.com/watch?v=2yFh7Vv0Paw.
$endgroup$
– CL.
4 hours ago
3
$begingroup$
This can indeed be an issue - not only the theoretical risk of damage but there are parts that won't do a clean power on reset if they were previously "sorta" powered by I/Os before real power was applied. If you find the board power net getting pulled up to .5v - .6v when "off" you may be in trouble territory.
$endgroup$
– Chris Stratton
4 hours ago
|
show 4 more comments
$begingroup$
@Toor What does "tbh" mean?
$endgroup$
– Elliot Alderson
5 hours ago
1
$begingroup$
It'll probably be okay.The gates can should be able to tolerate up to their maximum operating voltage anyways since they need to be able to do that to function at the top end of their supply voltage range. The Vdd+0.3 is in reference to the ESD clamp diodes in the MCU, but if the MCU is unpowered, those diodes don't have a rail to clamp to. If a 5V capable MCU was being powered off 3V and you applied 5V to an I/O, those diodes would try and clamp to the 3.3V rail, but that doesn't mean it would blow without them at 5V. You can use series resistors to limit the current through said diodes.
$endgroup$
– Toor
5 hours ago
$begingroup$
@ElliotAlderson "tbh" is a common internet-ism for "to be honest".
$endgroup$
– Hearth
5 hours ago
5
$begingroup$
@Toor The diodes will create a power rail; see youtube.com/watch?v=2yFh7Vv0Paw.
$endgroup$
– CL.
4 hours ago
3
$begingroup$
This can indeed be an issue - not only the theoretical risk of damage but there are parts that won't do a clean power on reset if they were previously "sorta" powered by I/Os before real power was applied. If you find the board power net getting pulled up to .5v - .6v when "off" you may be in trouble territory.
$endgroup$
– Chris Stratton
4 hours ago
$begingroup$
@Toor What does "tbh" mean?
$endgroup$
– Elliot Alderson
5 hours ago
$begingroup$
@Toor What does "tbh" mean?
$endgroup$
– Elliot Alderson
5 hours ago
1
1
$begingroup$
It'll probably be okay.The gates can should be able to tolerate up to their maximum operating voltage anyways since they need to be able to do that to function at the top end of their supply voltage range. The Vdd+0.3 is in reference to the ESD clamp diodes in the MCU, but if the MCU is unpowered, those diodes don't have a rail to clamp to. If a 5V capable MCU was being powered off 3V and you applied 5V to an I/O, those diodes would try and clamp to the 3.3V rail, but that doesn't mean it would blow without them at 5V. You can use series resistors to limit the current through said diodes.
$endgroup$
– Toor
5 hours ago
$begingroup$
It'll probably be okay.The gates can should be able to tolerate up to their maximum operating voltage anyways since they need to be able to do that to function at the top end of their supply voltage range. The Vdd+0.3 is in reference to the ESD clamp diodes in the MCU, but if the MCU is unpowered, those diodes don't have a rail to clamp to. If a 5V capable MCU was being powered off 3V and you applied 5V to an I/O, those diodes would try and clamp to the 3.3V rail, but that doesn't mean it would blow without them at 5V. You can use series resistors to limit the current through said diodes.
$endgroup$
– Toor
5 hours ago
$begingroup$
@ElliotAlderson "tbh" is a common internet-ism for "to be honest".
$endgroup$
– Hearth
5 hours ago
$begingroup$
@ElliotAlderson "tbh" is a common internet-ism for "to be honest".
$endgroup$
– Hearth
5 hours ago
5
5
$begingroup$
@Toor The diodes will create a power rail; see youtube.com/watch?v=2yFh7Vv0Paw.
$endgroup$
– CL.
4 hours ago
$begingroup$
@Toor The diodes will create a power rail; see youtube.com/watch?v=2yFh7Vv0Paw.
$endgroup$
– CL.
4 hours ago
3
3
$begingroup$
This can indeed be an issue - not only the theoretical risk of damage but there are parts that won't do a clean power on reset if they were previously "sorta" powered by I/Os before real power was applied. If you find the board power net getting pulled up to .5v - .6v when "off" you may be in trouble territory.
$endgroup$
– Chris Stratton
4 hours ago
$begingroup$
This can indeed be an issue - not only the theoretical risk of damage but there are parts that won't do a clean power on reset if they were previously "sorta" powered by I/Os before real power was applied. If you find the board power net getting pulled up to .5v - .6v when "off" you may be in trouble territory.
$endgroup$
– Chris Stratton
4 hours ago
|
show 4 more comments
1 Answer
1
active
oldest
votes
$begingroup$
It depends on the MCU, but in most cases it'll power up the MCU, and possibly the rest of the board through the MCU. The MCU will try to run, and do odd things. Your board will do odder things. If your board draws enough current, it'll damage that pin on the MCU.
You need to arrange for the UART signal to stay at 0V when the MCU is off. If the UART chip (or UART) that you are using doesn't have an enable pin (the USB UART chips that I've worked with can be configured for exactly the case you're describing), then AND the UART outputs with the microprocessor's VCC.
answered 2 hours ago
TimWescottTimWescott
5,7721414
$endgroup$
add a comment |
Your Answer
StackExchange.ifUsing("editor", function () {
return StackExchange.using("mathjaxEditing", function () {
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["\$", "\$"]]);
});
});
}, "mathjax-editing");
StackExchange.ifUsing("editor", function () {
return StackExchange.using("schematics", function () {
StackExchange.schematics.init();
});
}, "cicuitlab");
StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "135"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});
function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});
}
});
Inbae Jeong is a new contributor. Be nice, and check out our Code of Conduct.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f426764%2fuart-pins-to-unpowered-mcu%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
It depends on the MCU, but in most cases it'll power up the MCU, and possibly the rest of the board through the MCU. The MCU will try to run, and do odd things. Your board will do odder things. If your board draws enough current, it'll damage that pin on the MCU.
You need to arrange for the UART signal to stay at 0V when the MCU is off. If the UART chip (or UART) that you are using doesn't have an enable pin (the USB UART chips that I've worked with can be configured for exactly the case you're describing), then AND the UART outputs with the microprocessor's VCC.
answered 2 hours ago
TimWescottTimWescott
5,7721414
$endgroup$
add a comment |
$begingroup$
It depends on the MCU, but in most cases it'll power up the MCU, and possibly the rest of the board through the MCU. The MCU will try to run, and do odd things. Your board will do odder things. If your board draws enough current, it'll damage that pin on the MCU.
You need to arrange for the UART signal to stay at 0V when the MCU is off. If the UART chip (or UART) that you are using doesn't have an enable pin (the USB UART chips that I've worked with can be configured for exactly the case you're describing), then AND the UART outputs with the microprocessor's VCC.
answered 2 hours ago
TimWescottTimWescott
5,7721414
$endgroup$
add a comment |
$begingroup$
It depends on the MCU, but in most cases it'll power up the MCU, and possibly the rest of the board through the MCU. The MCU will try to run, and do odd things. Your board will do odder things. If your board draws enough current, it'll damage that pin on the MCU.
You need to arrange for the UART signal to stay at 0V when the MCU is off. If the UART chip (or UART) that you are using doesn't have an enable pin (the USB UART chips that I've worked with can be configured for exactly the case you're describing), then AND the UART outputs with the microprocessor's VCC.
answered 2 hours ago
TimWescottTimWescott
5,7721414
$endgroup$
It depends on the MCU, but in most cases it'll power up the MCU, and possibly the rest of the board through the MCU. The MCU will try to run, and do odd things. Your board will do odder things. If your board draws enough current, it'll damage that pin on the MCU.
You need to arrange for the UART signal to stay at 0V when the MCU is off. If the UART chip (or UART) that you are using doesn't have an enable pin (the USB UART chips that I've worked with can be configured for exactly the case you're describing), then AND the UART outputs with the microprocessor's VCC.
answered 2 hours ago
TimWescottTimWescott
5,7721414
answered 2 hours ago
TimWescottTimWescott
5,7721414
answered 2 hours ago
TimWescottTimWescott
5,7721414
answered 2 hours ago
TimWescottTimWescott
5,7721414
5,7721414
add a comment |
add a comment |
Inbae Jeong is a new contributor. Be nice, and check out our Code of Conduct.
Inbae Jeong is a new contributor. Be nice, and check out our Code of Conduct.
Inbae Jeong is a new contributor. Be nice, and check out our Code of Conduct.
Inbae Jeong is a new contributor. Be nice, and check out our Code of Conduct.
Thanks for contributing an answer to Electrical Engineering Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2felectronics.stackexchange.com%2fquestions%2f426764%2fuart-pins-to-unpowered-mcu%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
$begingroup$
@Toor What does "tbh" mean?
$endgroup$
– Elliot Alderson
5 hours ago
1
$begingroup$
It'll probably be okay.The gates can should be able to tolerate up to their maximum operating voltage anyways since they need to be able to do that to function at the top end of their supply voltage range. The Vdd+0.3 is in reference to the ESD clamp diodes in the MCU, but if the MCU is unpowered, those diodes don't have a rail to clamp to. If a 5V capable MCU was being powered off 3V and you applied 5V to an I/O, those diodes would try and clamp to the 3.3V rail, but that doesn't mean it would blow without them at 5V. You can use series resistors to limit the current through said diodes.
$endgroup$
– Toor
5 hours ago
$begingroup$
@ElliotAlderson "tbh" is a common internet-ism for "to be honest".
$endgroup$
– Hearth
5 hours ago
5
$begingroup$
@Toor The diodes will create a power rail; see youtube.com/watch?v=2yFh7Vv0Paw.
$endgroup$
– CL.
4 hours ago
3
$begingroup$
This can indeed be an issue - not only the theoretical risk of damage but there are parts that won't do a clean power on reset if they were previously "sorta" powered by I/Os before real power was applied. If you find the board power net getting pulled up to .5v - .6v when "off" you may be in trouble territory.
$endgroup$
– Chris Stratton
4 hours ago